Reflex SV

A high water-content SiHy soft lens with an extensive parameter range - the ideal choice for the specialist practitioner.


To order Reflex Toric PB as a 3-monthly or 1-monthly replacement lens please call our friendly team on: 01424 850620

Reflex SV is a 74% water-content SiHy soft lens designed for even the highest prescriptions. Lathe-cut, Reflex has a unique aspheric front surface geometry to reduce thickness and provide exceptional comfort and oxygen transmissibility.

Initial Lens Specification

If you know the lens dimensions you wish to fit, supply those to No7 and a lens will be manufactured to those specifications. Otherwise, call our technical help desk with keratometry readings, spectacle Rx and HVID and we will provide a lens for you to assess.

Assessment Of Fit

The lens should give good comfort, centration and adequate smooth movement in all directions of gaze.

A Good Fit

A good fit should be:

  • Comfortable
  • Cover the limbus in all directions
  • Centre well even on upward gaze
  • Move freely on blinking with the lower lid pulled down - between 0.50mm and 1.00mm
  • Give sharp, stable keratometry mires immediately after blinking

N/A

  • 59% water-content lens with an extensive parameter range
  • Enhanced biocompatibility Glycerol Methacrylate material provides all-day comfort for all wearers including computer users
  • Superior resistance to dehydration - sustains oxygen transmissibility and comfort throughout the wearing cycle
  • Computer controlled design and manufacture guarantee credible consistent lenses over the complete range of powers
  • All high powered lenses are manufactured with a unique aspheric front surface geometry to reduce thickness and provide exceptional comfort and oxygen transmissibility
  • Reflex SV is suitable for: -
    • High minus powers
    • Paediatric correction
    • Aphakia
    • Non standard base curves and diameters
Material Definitive SiHy Material
Water Content 74%
Manufacturing Process Lathe Cut
Base Curve 8.60mm std - or 7.00 to 10.50 in 0.10 steps
Diameter 14.50 std - or 12 to 17.00 in 0.10 steps
Power Range -35.00 to +35.00 in (0.25D Steps)
Centre Thickness @ -3.00D 0.08mm
Dk 60
Edge Thickness 0.075mm
Optic Zone @ -3.00 8.00mm
Handling Tint Light blue
Recommended Replacement Schedule 3 monthly replacement, daily wear
Lens Care Indications Chemical or peroxide disinfection
Trial Lens No trial lens available; No7 100% fitting guarantee applies

Click to enlarge image

Related Products